Add README.md for snmp input plugin
This commit is contained in:
Thibault Cohen
parent
b31664677c
commit
be37227784
|
|
@ -0,0 +1,549 @@
|
|||
# SNMP Input Plugin
|
||||
|
||||
The SNMP input plugin gathers metrics from SNMP agents
|
||||
|
||||
### Configuration:
|
||||
|
||||
|
||||
#### Very simple example
|
||||
|
||||
In this example, the plugin will gather value of OIDS:
|
||||
|
||||
- `.1.3.6.1.2.1.2.2.1.4.1`
|
||||
|
||||
```toml
|
||||
# Very Simple Example
|
||||
[[inputs.snmp]]
|
||||
|
||||
[[inputs.snmp.host]]
|
||||
address = "127.0.0.1:161"
|
||||
# SNMP community
|
||||
community = "public" # default public
|
||||
# SNMP version (1, 2 or 3)
|
||||
# Version 3 not supported yet
|
||||
version = 2 # default 2
|
||||
# Simple list of OIDs to get, in addition to "collect"
|
||||
get_oids = [".1.3.6.1.2.1.2.2.1.4.1"]
|
||||
```
|
||||
|
||||
|
||||
#### Simple example
|
||||
|
||||
In this example, Telegraf gathers value of OIDS:
|
||||
|
||||
- named **ifnumber**
|
||||
- named **interface_speed**
|
||||
|
||||
With **inputs.snmp.get** section the plugin gets the oid number:
|
||||
|
||||
- **ifnumber** => `.1.3.6.1.2.1.2.1.0`
|
||||
- **interface_speed** => *ifSpeed*
|
||||
|
||||
As you can see *ifSpeed* is not a valid OID. In order to get
|
||||
the valid OID, the plugin uses `snmptranslate_file` to match the OID:
|
||||
|
||||
- **ifnumber** => `.1.3.6.1.2.1.2.1.0`
|
||||
- **interface_speed** => *ifSpeed* => `.1.3.6.1.2.1.2.2.1.5`
|
||||
|
||||
Also as the plugin will append `instance` to the corresponding OID:
|
||||
|
||||
- **ifnumber** => `.1.3.6.1.2.1.2.1.0`
|
||||
- **interface_speed** => *ifSpeed* => `.1.3.6.1.2.1.2.2.1.5.1`
|
||||
|
||||
In this example, the plugin will gather value of OIDS:
|
||||
|
||||
- `.1.3.6.1.2.1.2.1.0`
|
||||
- `.1.3.6.1.2.1.2.2.1.5.1`
|
||||
|
||||
|
||||
```toml
|
||||
# Simple example
|
||||
[[inputs.snmp]]
|
||||
## Use 'oids.txt' file to translate oids to names
|
||||
## To generate 'oids.txt' you need to run:
|
||||
## snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
|
||||
## Or if you have an other MIB folder with custom MIBs
|
||||
## snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
|
||||
snmptranslate_file = "/tmp/oids.txt"
|
||||
[[inputs.snmp.host]]
|
||||
address = "127.0.0.1:161"
|
||||
# SNMP community
|
||||
community = "public" # default public
|
||||
# SNMP version (1, 2 or 3)
|
||||
# Version 3 not supported yet
|
||||
version = 2 # default 2
|
||||
# Which get/bulk do you want to collect for this host
|
||||
collect = ["ifnumber", "interface_speed"]
|
||||
|
||||
[[inputs.snmp.get]]
|
||||
name = "ifnumber"
|
||||
oid = ".1.3.6.1.2.1.2.1.0"
|
||||
|
||||
[[inputs.snmp.get]]
|
||||
name = "interface_speed"
|
||||
oid = "ifSpeed"
|
||||
instance = "1"
|
||||
|
||||
```
|
||||
|
||||
|
||||
#### Simple bulk example
|
||||
|
||||
In this example, Telegraf gathers value of OIDS:
|
||||
|
||||
- named **ifnumber**
|
||||
- named **interface_speed**
|
||||
- named **if_out_octets**
|
||||
|
||||
With **inputs.snmp.get** section the plugin gets oid number:
|
||||
|
||||
- **ifnumber** => `.1.3.6.1.2.1.2.1.0`
|
||||
- **interface_speed** => *ifSpeed*
|
||||
|
||||
With **inputs.snmp.bulk** section the plugin gets the oid number:
|
||||
|
||||
- **if_out_octets** => *ifOutOctets*
|
||||
|
||||
As you can see *ifSpeed* and *ifOutOctets* are not a valid OID.
|
||||
In order to get the valid OID, the plugin uses `snmptranslate_file`
|
||||
to match the OID:
|
||||
|
||||
- **ifnumber** => `.1.3.6.1.2.1.2.1.0`
|
||||
- **interface_speed** => *ifSpeed* => `.1.3.6.1.2.1.2.2.1.5`
|
||||
- **if_out_octets** => *ifOutOctets* => `.1.3.6.1.2.1.2.2.1.16`
|
||||
|
||||
Also, the plugin will append `instance` to the corresponding OID:
|
||||
|
||||
- **ifnumber** => `.1.3.6.1.2.1.2.1.0`
|
||||
- **interface_speed** => *ifSpeed* => `.1.3.6.1.2.1.2.2.1.5.1`
|
||||
|
||||
And **if_out_octets** is a bulk request, the plugin will gathers all
|
||||
OIDS in the table.
|
||||
|
||||
- `.1.3.6.1.2.1.2.2.1.16.1`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.2`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.3`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.4`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.5`
|
||||
- `...`
|
||||
|
||||
In this example, the plugin will gather value of OIDS:
|
||||
|
||||
- `.1.3.6.1.2.1.2.1.0`
|
||||
- `.1.3.6.1.2.1.2.2.1.5.1`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.1`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.2`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.3`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.4`
|
||||
- `.1.3.6.1.2.1.2.2.1.16.5`
|
||||
- `...`
|
||||
|
||||
|
||||
```toml
|
||||
# Simple bulk example
|
||||
[[inputs.snmp]]
|
||||
## Use 'oids.txt' file to translate oids to names
|
||||
## To generate 'oids.txt' you need to run:
|
||||
## snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
|
||||
## Or if you have an other MIB folder with custom MIBs
|
||||
## snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
|
||||
snmptranslate_file = "/tmp/oids.txt"
|
||||
[[inputs.snmp.host]]
|
||||
address = "127.0.0.1:161"
|
||||
# SNMP community
|
||||
community = "public" # default public
|
||||
# SNMP version (1, 2 or 3)
|
||||
# Version 3 not supported yet
|
||||
version = 2 # default 2
|
||||
# Which get/bulk do you want to collect for this host
|
||||
collect = ["interface_speed", "if_number", "if_out_octets"]
|
||||
|
||||
[[inputs.snmp.get]]
|
||||
name = "interface_speed"
|
||||
oid = "ifSpeed"
|
||||
instance = "1"
|
||||
|
||||
[[inputs.snmp.get]]
|
||||
name = "if_number"
|
||||
oid = "ifNumber"
|
||||
|
||||
[[inputs.snmp.bulk]]
|
||||
name = "if_out_octets"
|
||||
oid = "ifOutOctets"
|
||||
```
|
||||
|
||||
|
||||
#### Table example
|
||||
|
||||
In this example, we remove collect attribute to the host section,
|
||||
but you can still use it in combination of the following part.
|
||||
|
||||
Note: This example is like a bulk request a but using an
|
||||
other configuration
|
||||
|
||||
Telegraf gathers value of OIDS of the table:
|
||||
|
||||
- named **iftable1**
|
||||
|
||||
With **inputs.snmp.table** section the plugin gets oid number:
|
||||
|
||||
- **iftable1** => `.1.3.6.1.2.1.31.1.1.1`
|
||||
|
||||
Also **iftable1** is a table, the plugin will gathers all
|
||||
OIDS in the table and in the subtables
|
||||
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.2`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.3`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.4`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.2`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.2....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.3`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.3....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.4`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.4....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.5....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6....`
|
||||
- `...`
|
||||
|
||||
```toml
|
||||
# Table example
|
||||
[[inputs.snmp]]
|
||||
## Use 'oids.txt' file to translate oids to names
|
||||
## To generate 'oids.txt' you need to run:
|
||||
## snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
|
||||
## Or if you have an other MIB folder with custom MIBs
|
||||
## snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
|
||||
snmptranslate_file = "/tmp/oids.txt"
|
||||
[[inputs.snmp.host]]
|
||||
address = "127.0.0.1:161"
|
||||
# SNMP community
|
||||
community = "public" # default public
|
||||
# SNMP version (1, 2 or 3)
|
||||
# Version 3 not supported yet
|
||||
version = 2 # default 2
|
||||
# Which get/bulk do you want to collect for this host
|
||||
# Which table do you want to collect
|
||||
[[inputs.snmp.host.table]]
|
||||
name = "iftable1"
|
||||
|
||||
# table without mapping neither subtables
|
||||
# This is like bulk request
|
||||
[[inputs.snmp.table]]
|
||||
name = "iftable1"
|
||||
oid = ".1.3.6.1.2.1.31.1.1.1"
|
||||
```
|
||||
|
||||
|
||||
#### Table with subtable example
|
||||
|
||||
In this example, we remove collect attribute to the host section,
|
||||
but you can still use it in combination of the following part.
|
||||
|
||||
Note: This example is like a bulk request a but using an
|
||||
other configuration
|
||||
|
||||
Telegraf gathers value of OIDS of the table:
|
||||
|
||||
- named **iftable2**
|
||||
|
||||
With **inputs.snmp.table** section *AND* **sub_tables** attribute,
|
||||
the plugin will get OIDS from subtables:
|
||||
|
||||
- **iftable2** => `.1.3.6.1.2.1.2.2.1.13`
|
||||
|
||||
Also **iftable2** is a table, the plugin will gathers all
|
||||
OIDS in subtables:
|
||||
|
||||
- `.1.3.6.1.2.1.2.2.1.13.1`
|
||||
- `.1.3.6.1.2.1.2.2.1.13.2`
|
||||
- `.1.3.6.1.2.1.2.2.1.13.3`
|
||||
- `.1.3.6.1.2.1.2.2.1.13.4`
|
||||
- `.1.3.6.1.2.1.2.2.1.13....`
|
||||
|
||||
|
||||
```toml
|
||||
# Table with subtable example
|
||||
[[inputs.snmp]]
|
||||
## Use 'oids.txt' file to translate oids to names
|
||||
## To generate 'oids.txt' you need to run:
|
||||
## snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
|
||||
## Or if you have an other MIB folder with custom MIBs
|
||||
## snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
|
||||
snmptranslate_file = "/tmp/oids.txt"
|
||||
[[inputs.snmp.host]]
|
||||
address = "127.0.0.1:161"
|
||||
# SNMP community
|
||||
community = "public" # default public
|
||||
# SNMP version (1, 2 or 3)
|
||||
# Version 3 not supported yet
|
||||
version = 2 # default 2
|
||||
# Which table do you want to collect
|
||||
[[inputs.snmp.host.table]]
|
||||
name = "iftable2"
|
||||
|
||||
# table without mapping but with subtables
|
||||
[[inputs.snmp.table]]
|
||||
name = "iftable2"
|
||||
sub_tables = [".1.3.6.1.2.1.2.2.1.13"]
|
||||
# note
|
||||
# oid attribute is useless
|
||||
```
|
||||
|
||||
|
||||
#### Table with mapping example
|
||||
|
||||
In this example, we remove collect attribute to the host section,
|
||||
but you can still use it in combination of the following part.
|
||||
|
||||
Telegraf gathers value of OIDS of the table:
|
||||
|
||||
- named **iftable3**
|
||||
|
||||
With **inputs.snmp.table** section the plugin gets oid number:
|
||||
|
||||
- **iftable3** => `.1.3.6.1.2.1.31.1.1.1`
|
||||
|
||||
Also **iftable2** is a table, the plugin will gathers all
|
||||
OIDS in the table and in the subtables
|
||||
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.2`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.3`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.4`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.2`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.2....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.3`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.3....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.4`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.4....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.5....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6....`
|
||||
- `...`
|
||||
|
||||
But the **include_instances** attribute will filter which OIDS
|
||||
will be gathered; As you see, there is an other attribute, `mapping_table`.
|
||||
`include_instances` and `mapping_table` permit to build a hash table
|
||||
to filter only OIDS you want.
|
||||
Let's say, we have the following data on SNMP server:
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.1` has as value: `enp5s0`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.2` has as value: `enp5s1`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.3` has as value: `enp5s2`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.4` has as value: `eth0`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.5` has as value: `eth1`
|
||||
|
||||
The plugin will build the following hash table:
|
||||
|
||||
| instance name | instance id |
|
||||
|---------------|-------------|
|
||||
| `enp5s0` | `1` |
|
||||
| `enp5s1` | `2` |
|
||||
| `enp5s2` | `3` |
|
||||
| `eth0` | `4` |
|
||||
| `eth1` | `5` |
|
||||
|
||||
With the **include_instances** attribute, the plugin will gather
|
||||
the following OIDS:
|
||||
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.1.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.2.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.2.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.3.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.3.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.4.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.4.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.5.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.5.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.5`
|
||||
- `...`
|
||||
|
||||
Note: the plugin will add instance name as tag *instance*
|
||||
|
||||
```toml
|
||||
# Simple table with mapping example
|
||||
[[inputs.snmp]]
|
||||
## Use 'oids.txt' file to translate oids to names
|
||||
## To generate 'oids.txt' you need to run:
|
||||
## snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
|
||||
## Or if you have an other MIB folder with custom MIBs
|
||||
## snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
|
||||
snmptranslate_file = "/tmp/oids.txt"
|
||||
[[inputs.snmp.host]]
|
||||
address = "127.0.0.1:161"
|
||||
# SNMP community
|
||||
community = "public" # default public
|
||||
# SNMP version (1, 2 or 3)
|
||||
# Version 3 not supported yet
|
||||
version = 2 # default 2
|
||||
# Which table do you want to collect
|
||||
[[inputs.snmp.host.table]]
|
||||
name = "iftable3"
|
||||
include_instances = ["enp5s0", "eth1"]
|
||||
|
||||
# table with mapping but without subtables
|
||||
[[inputs.snmp.table]]
|
||||
name = "iftable3"
|
||||
oid = ".1.3.6.1.2.1.31.1.1.1"
|
||||
# if empty. get all instances
|
||||
mapping_table = ".1.3.6.1.2.1.31.1.1.1.1"
|
||||
# if empty, get all subtables
|
||||
```
|
||||
|
||||
|
||||
#### Table with both mapping and subtable example
|
||||
|
||||
In this example, we remove collect attribute to the host section,
|
||||
but you can still use it in combination of the following part.
|
||||
|
||||
Telegraf gathers value of OIDS of the table:
|
||||
|
||||
- named **iftable4**
|
||||
|
||||
With **inputs.snmp.table** section *AND* **sub_tables** attribute,
|
||||
the plugin will get OIDS from subtables:
|
||||
|
||||
- **iftable4** => `.1.3.6.1.2.1.31.1.1.1`
|
||||
|
||||
Also **iftable2** is a table, the plugin will gathers all
|
||||
OIDS in the table and in the subtables
|
||||
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.1
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.2`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.3`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.4`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6....`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.10.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.10.2`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.10.3`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.10.4`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.10....`
|
||||
|
||||
But the **include_instances** attribute will filter which OIDS
|
||||
will be gathered; As you see, there is an other attribute, `mapping_table`.
|
||||
`include_instances` and `mapping_table` permit to build a hash table
|
||||
to filter only OIDS you want.
|
||||
Let's say, we have the following data on SNMP server:
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.1` has as value: `enp5s0`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.2` has as value: `enp5s1`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.3` has as value: `enp5s2`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.4` has as value: `eth0`
|
||||
- OID: `.1.3.6.1.2.1.31.1.1.1.1.5` has as value: `eth1`
|
||||
|
||||
The plugin will build the following hash table:
|
||||
|
||||
| instance name | instance id |
|
||||
|---------------|-------------|
|
||||
| `enp5s0` | `1` |
|
||||
| `enp5s1` | `2` |
|
||||
| `enp5s2` | `3` |
|
||||
| `eth0` | `4` |
|
||||
| `eth1` | `5` |
|
||||
|
||||
With the **include_instances** attribute, the plugin will gather
|
||||
the following OIDS:
|
||||
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.6.5`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.10.1`
|
||||
- `.1.3.6.1.2.1.31.1.1.1.10.5`
|
||||
|
||||
Note: the plugin will add instance name as tag *instance*
|
||||
|
||||
|
||||
|
||||
```toml
|
||||
# Table with both mapping and subtable example
|
||||
[[inputs.snmp]]
|
||||
## Use 'oids.txt' file to translate oids to names
|
||||
## To generate 'oids.txt' you need to run:
|
||||
## snmptranslate -m all -Tz -On | sed -e 's/"//g' > /tmp/oids.txt
|
||||
## Or if you have an other MIB folder with custom MIBs
|
||||
## snmptranslate -M /mycustommibfolder -Tz -On -m all | sed -e 's/"//g' > oids.txt
|
||||
snmptranslate_file = "/tmp/oids.txt"
|
||||
[[inputs.snmp.host]]
|
||||
address = "127.0.0.1:161"
|
||||
# SNMP community
|
||||
community = "public" # default public
|
||||
# SNMP version (1, 2 or 3)
|
||||
# Version 3 not supported yet
|
||||
version = 2 # default 2
|
||||
# Which table do you want to collect
|
||||
[[inputs.snmp.host.table]]
|
||||
name = "iftable4"
|
||||
include_instances = ["enp5s0", "eth1"]
|
||||
|
||||
# table with both mapping and subtables
|
||||
[[inputs.snmp.table]]
|
||||
name = "iftable4"
|
||||
# if empty get all instances
|
||||
mapping_table = ".1.3.6.1.2.1.31.1.1.1.1"
|
||||
# if empty get all subtables
|
||||
# sub_tables could be not "real subtables"
|
||||
sub_tables=[".1.3.6.1.2.1.2.2.1.13", "bytes_recv", "bytes_send"]
|
||||
# note
|
||||
# oid attribute is useless
|
||||
|
||||
# SNMP SUBTABLES
|
||||
[[plugins.snmp.subtable]]
|
||||
name = "bytes_recv"
|
||||
oid = ".1.3.6.1.2.1.31.1.1.1.6"
|
||||
unit = "octets"
|
||||
|
||||
[[plugins.snmp.subtable]]
|
||||
name = "bytes_send"
|
||||
oid = ".1.3.6.1.2.1.31.1.1.1.10"
|
||||
unit = "octets"
|
||||
```
|
||||
|
||||
#### Configuration notes
|
||||
|
||||
- In **plugins.snmp.table** section, the `oid` attribute is useless if
|
||||
the `sub_tables` attributes is defined
|
||||
|
||||
- In **plugins.snmp.subtable** section, you can put a name from `snmptranslate_file`
|
||||
as `oid` attribute instead of a valid OID
|
||||
|
||||
### Measurements & Fields:
|
||||
|
||||
With the last example (Table with both mapping and subtable example):
|
||||
|
||||
- ifHCOutOctets
|
||||
- ifHCOutOctets
|
||||
- ifInDiscards
|
||||
- ifInDiscards
|
||||
- ifHCInOctets
|
||||
- ifHCInOctets
|
||||
|
||||
### Tags:
|
||||
|
||||
With the last example (Table with both mapping and subtable example):
|
||||
|
||||
- ifHCOutOctets
|
||||
- host
|
||||
- instance
|
||||
- unit
|
||||
- ifInDiscards
|
||||
- host
|
||||
- instance
|
||||
- ifHCInOctets
|
||||
- host
|
||||
- instance
|
||||
- unit
|
||||
|
||||
### Example Output:
|
||||
|
||||
With the last example (Table with both mapping and subtable example):
|
||||
|
||||
```
|
||||
ifHCOutOctets,host=127.0.0.1,instance=enp5s0,unit=octets ifHCOutOctets=10565628i 1456878706044462901
|
||||
ifInDiscards,host=127.0.0.1,instance=enp5s0 ifInDiscards=0i 1456878706044510264
|
||||
ifHCInOctets,host=127.0.0.1,instance=enp5s0,unit=octets ifHCInOctets=76351777i 1456878706044531312
|
||||
```
|
||||
Loading…
Reference in New Issue