telegraf/CHANGELOG.md

v0.13 [unreleased]

Release Notes

• Breaking Change: docker plugin tags. The cont_id tag no longer exists, it will now be a field, and be called container_id. Additionally, cont_image and cont_name are being renamed to container_image and container_name.
• Breaking Change: docker plugin measurements. The docker_cpu, docker_mem, docker_blkio and docker_net measurements are being renamed to docker_container_cpu, docker_container_mem, docker_container_blkio and docker_container_net. Why? Because these metrics are specifically tracking per-container stats. The problem with per-container stats, in some use-cases, is that if containers are short-lived AND names are not kept consistent, then the series cardinality will balloon very quickly. So adding "container" to each metric will: (1) make it more clear that these metrics are per-container, and (2) allow users to easily drop per-container metrics if cardinality is an issue (namedrop = ["docker_container_*"])
• tagexclude and taginclude are now available, which can be used to remove tags from measurements on inputs and outputs. See the configuration doc for more details.
• Measurement filtering: All measurement filters now match based on glob only. Previously there was an undocumented behavior where filters would match based on prefix in addition to globs. This means that a filter like fielddrop = ["time_"] will need to be changed to fielddrop = ["time_*"]
• datadog: measurement and field names will no longer have _ replaced by .
• The following plugins have changed their tags to not overwrite the host tag:
  • cassandra: host -> cassandra_host
  • disque: host -> disque_host
  • rethinkdb: host -> rethinkdb_host

Features

• #1017: taginclude and tagexclude arguments.
• #1015: Docker plugin schema refactor.
• #889: Improved MySQL plugin. Thanks @maksadbek!
• #1060: TTL metrics added to MongoDB input plugin
• #1056: Don't allow inputs to overwrite host tags.
• #1035: Add user, exe, pidfile tags to procstat plugin.
• #1041: Add n_cpus field to the system plugin.
• #1072: New Input Plugin: filestat.
• #1066: Replication lag metrics for MongoDB input plugin

Bugfixes

• #921: mqtt_consumer stops gathering metrics. Thanks @chaton78!
• #1013: Close dead riemann output connections. Thanks @echupriyanov!
• #1012: Set default tags in test accumulator.
• #1024: Don't replace . with _ in datadog output.
• #1058: Fix possible leaky TCP connections in influxdb output.
• #1044: Fix SNMP OID possible collisions. Thanks @relip
• #1022: Dont error deb/rpm install on systemd errors.
• #1078: Use default AWS credential chain.

v0.12.1 [2016-04-14]

Release Notes

• Breaking change in the dovecot input plugin. See Features section below.
• Graphite output templates are now supported. See https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md#graphite
• Possible breaking change for the librato and graphite outputs. Telegraf will no longer insert field names when the field is simply named value. This is because the value field is redundant in the graphite/librato context.

Features

• #1009: Cassandra input plugin. Thanks @subhachandrachandra!
• #976: Reduce allocations in the UDP and statsd inputs.
• #979: Reduce allocations in the TCP listener.
• #992: Refactor allocations in TCP/UDP listeners.
• #935: AWS Cloudwatch input plugin. Thanks @joshhardy & @ljosa!
• #943: http_response input plugin. Thanks @Lswith!
• #939: sysstat input plugin. Thanks @zbindenren!
• #998: breaking change enabled global, user and ip queries in dovecot plugin. Thanks @mikif70!
• #1001: Graphite serializer templates.
• #1008: Adding memstats metrics to the influxdb plugin.

Bugfixes

• #968: Processes plugin gets unknown state when spaces are in (command name)
• #969: ipmi_sensors: allow : in password. Thanks @awaw!
• #972: dovecot: remove extra newline in dovecot command. Thanks @mrannanj!
• #645: docker plugin i/o error on closed pipe. Thanks @tripledes!

v0.12.0 [2016-04-05]

Features

• #951: Parse environment variables in the config file.
• #948: Cleanup config file and make default package version include all plugins (but commented).
• #927: Adds parsing of tags to the statsd input when using DataDog's dogstatsd extension
• #863: AMQP output: allow external auth. Thanks @ekini!
• #707: Improved prometheus plugin. Thanks @titilambert!
• #878: Added json serializer. Thanks @ch3lo!
• #880: Add the ability to specify the bearer token to the prometheus plugin. Thanks @jchauncey!
• #882: Fixed SQL Server Plugin issues
• #849: Adding ability to parse single values as an input data type.
• #844: postgres_extensible plugin added. Thanks @menardorama!
• #866: couchbase input plugin. Thanks @ljosa!
• #789: Support multiple field specification and field* in graphite templates. Thanks @chrusty!
• #762: Nagios parser for the exec plugin. Thanks @titilambert!
• #848: Provide option to omit host tag from telegraf agent.
• #928: Deprecating the statsd "convert_names" options, expose separator config.
• #919: ipmi_sensor input plugin. Thanks @ebookbug!
• #945: KAFKA output: codec, acks, and retry configuration. Thanks @framiere!

Bugfixes

• #890: Create TLS config even if only ssl_ca is provided.
• #884: Do not call write method if there are 0 metrics to write.
• #898: Put database name in quotes, fixes special characters in the database name.
• #656: No longer run lsof on linux to get netstat data, fixes permissions issue.
• #907: Fix prometheus invalid label/measurement name key.
• #841: Fix memcached unix socket panic.
• #873: Fix SNMP plugin sometimes not returning metrics. Thanks @titiliambert!
• #934: phpfpm: Fix fcgi uri path. Thanks @rudenkovk!
• #805: Kafka consumer stops gathering after i/o timeout.
• #959: reduce mongodb & prometheus collection timeouts. Thanks @PierreF!

v0.11.1 [2016-03-17]

Release Notes

• Primarily this release was cut to fix #859

Features

• #747: Start telegraf on install & remove on uninstall. Thanks @pierref!
• #794: Add service reload ability. Thanks @entertainyou!

Bugfixes

• #852: Windows zip package fix
• #859: httpjson plugin panic

v0.11.0 [2016-03-15]

Release Notes

Features

• #692: Support InfluxDB retention policies
• #771: Default timeouts for input plugns. Thanks @PierreF!
• #758: UDP Listener input plugin, thanks @whatyouhide!
• #769: httpjson plugin: allow specifying SSL configuration.
• #735: SNMP Table feature. Thanks @titilambert!
• #754: docker plugin: adding docker info metrics to output. Thanks @titilambert!
• #788: -input-list and -output-list command-line options. Thanks @ebookbug!
• #778: Adding a TCP input listener.
• #797: Provide option for persistent MQTT consumer client sessions.
• #799: Add number of threads for procstat input plugin. Thanks @titilambert!
• #776: Add Zookeeper chroot option to kafka_consumer. Thanks @prune998!
• #811: Add processes plugin for classifying total procs on system. Thanks @titilambert!
• #235: Add number of users to the system input plugin.
• #826: "kernel" linux plugin for /proc/stat metrics (context switches, interrupts, etc.)
• #847: ntpq: Input plugin for running ntp query executable and gathering metrics.

Bugfixes

• #748: Fix sensor plugin split on ":"
• #722: Librato output plugin fixes. Thanks @chrusty!
• #745: Fix Telegraf toml parse panic on large config files. Thanks @titilambert!
• #781: Fix mqtt_consumer username not being set. Thanks @chaton78!
• #786: Fix mqtt output username not being set. Thanks @msangoi!
• #773: Fix duplicate measurements in snmp plugin. Thanks @titilambert!
• #708: packaging: build ARM package
• #713: packaging: insecure permissions error on log directory
• #816: Fix phpfpm panic if fcgi endpoint unreachable.
• #828: fix net_response plugin overwriting host tag.
• #821: Remove postgres password from server tag. Thanks @menardorama!

v0.10.4.1

Release Notes

• Bug in the build script broke deb and rpm packages.

Bugfixes

• #750: deb package broken
• #752: rpm package broken

v0.10.4 [2016-02-24]

Release Notes

• The pass/drop parameters have been renamed to fielddrop/fieldpass parameters, to more accurately indicate their purpose.
• There are also now namedrop/namepass parameters for passing/dropping based on the metric name.
• Experimental windows builds now available.

Features

• #727: riak input, thanks @jcoene!
• #694: DNS Query input, thanks @mjasion!
• #724: username matching for procstat input, thanks @zorel!
• #736: Ignore dummy filesystems from disk plugin. Thanks @PierreF!
• #737: Support multiple fields for statsd input. Thanks @mattheath!

Bugfixes

• #701: output write count shouldnt print in quiet mode.
• #746: httpjson plugin: Fix HTTP GET parameters.

v0.10.3 [2016-02-18]

Release Notes

• Users of the exec and kafka_consumer (and the new nats_consumer and mqtt_consumer plugins) can now specify the incoming data format that they would like to parse. Currently supports: "json", "influx", and "graphite"
• Users of message broker and file output plugins can now choose what data format they would like to output. Currently supports: "influx" and "graphite"
• More info on parsing incoming data formats can be found here
• More info on serializing outgoing data formats can be found here
• Telegraf now has an option flush_buffer_when_full that will flush the metric buffer whenever it fills up for each output, rather than dropping points and only flushing on a set time interval. This will default to true and is in the [agent] config section.

Features

• #652: CouchDB Input Plugin. Thanks @codehate!
• #655: Support parsing arbitrary data formats. Currently limited to kafka_consumer and exec inputs.
• #671: Dovecot input plugin. Thanks @mikif70!
• #680: NATS consumer input plugin. Thanks @netixen!
• #676: MQTT consumer input plugin.
• #683: PostGRES input plugin: add pg_stat_bgwriter. Thanks @menardorama!
• #679: File/stdout output plugin.
• #679: Support for arbitrary output data formats.
• #695: raindrops input plugin. Thanks @burdandrei!
• #650: net_response input plugin. Thanks @titilambert!
• #699: Flush based on buffer size rather than time.
• #682: Mesos input plugin. Thanks @tripledes!

Bugfixes

• #443: Fix Ping command timeout parameter on Linux.
• #662: Change [tags] to [global_tags] to fix multiple-plugin tags bug.
• #642: Riemann output plugin issues.
• #394: Support HTTP POST. Thanks @gabelev!
• #715: Fix influxdb precision config panic. Thanks @netixen!

v0.10.2 [2016-02-04]

Release Notes

• Statsd timing measurements are now aggregated into a single measurement with fields.
• Graphite output now inserts tags into the bucket in alphabetical order.
• Normalized TLS/SSL support for output plugins: MQTT, AMQP, Kafka
• verify_ssl config option was removed from Kafka because it was actually doing the opposite of what it claimed to do (yikes). It's been replaced by insecure_skip_verify

Features

• #575: Support for collecting Windows Performance Counters. Thanks @TheFlyingCorpse!
• #564: features for plugin writing simplification. Internal metric data type.
• #603: Aggregate statsd timing measurements into fields. Thanks @marcinbunsch!
• #601: Warn when overwriting cached metrics.
• #614: PowerDNS input plugin. Thanks @Kasen!
• #617: exec plugin: parse influx line protocol in addition to JSON.
• #628: Windows perf counters: pre-vista support

Bugfixes

• #595: graphite output should include tags to separate duplicate measurements.
• #599: datadog plugin tags not working.
• #600: datadog measurement/field name parsing is wrong.
• #602: Fix statsd field name templating.
• #612: Docker input panic fix if stats received are nil.
• #634: Properly set host headers in httpjson. Thanks @reginaldosousa!

v0.10.1 [2016-01-27]

Release Notes

• Telegraf now keeps a fixed-length buffer of metrics per-output. This buffer defaults to 10,000 metrics, and is adjustable. The buffer is cleared when a successful write to that output occurs.
• The docker plugin has been significantly overhauled to add more metrics and allow for docker-machine (incl OSX) support. See the readme for the latest measurements, fields, and tags. There is also now support for specifying a docker endpoint to get metrics from.

Features

• #509: Flatten JSON arrays with indices. Thanks @psilva261!
• #512: Python 3 build script, add lsof dep to package. Thanks @Ormod!
• #475: Add response time to httpjson plugin. Thanks @titilambert!
• #519: Added a sensors input based on lm-sensors. Thanks @md14454!
• #467: Add option to disable statsd measurement name conversion.
• #534: NSQ input plugin. Thanks @allingeek!
• #494: Graphite output plugin. Thanks @titilambert!
• AMQP SSL support. Thanks @ekini!
• #539: Reload config on SIGHUP. Thanks @titilambert!
• #522: Phusion passenger input plugin. Thanks @kureikain!
• #541: Kafka output TLS cert support. Thanks @Ormod!
• #551: Statsd UDP read packet size now defaults to 1500 bytes, and is configurable.
• #552: Support for collection interval jittering.
• #484: Include usage percent with procstat metrics.
• #553: Amazon CloudWatch output. thanks @skwong2!
• #503: Support docker endpoint configuration.
• #563: Docker plugin overhaul.
• #285: Fixed-size buffer of points.
• #546: SNMP Input plugin. Thanks @titilambert!
• #589: Microsoft SQL Server input plugin. Thanks @zensqlmonitor!
• #573: Github webhooks consumer input. Thanks @jackzampolin!
• #471: httpjson request headers. Thanks @asosso!

Bugfixes

• #506: Ping input doesn't return response time metric when timeout. Thanks @titilambert!
• #508: Fix prometheus cardinality issue with the net plugin
• #499 & #502: php fpm unix socket and other fixes, thanks @kureikain!
• #543: Statsd Packet size sometimes truncated.
• #440: Don't query filtered devices for disk stats.
• #463: Docker plugin not working on AWS Linux
• #568: Multiple output race condition.
• #585: Log stack trace and continue on Telegraf panic. Thanks @wutaizeng!

v0.10.0 [2016-01-12]

Release Notes

• Linux packages have been taken out of opt, the binary is now in /usr/bin and configuration files are in /etc/telegraf
• breaking change plugins have been renamed to inputs. This was done because plugins is too generic, as there are now also "output plugins", and will likely be "aggregator plugins" and "filter plugins" in the future. Additionally, inputs/ and outputs/ directories have been placed in the root-level plugins/ directory.
• breaking change the io plugin has been renamed diskio
• breaking change plugin measurements aggregated into a single measurement.
• breaking change jolokia plugin: must use global tag/drop/pass parameters for configuration.
• breaking change twemproxy plugin: prefix option removed.
• breaking change procstat cpu measurements are now prepended with cpu_time_ instead of only cpu_
• breaking change some command-line flags have been renamed to separate words. -configdirectory -> -config-directory, -filter -> -input-filter, -outputfilter -> -output-filter
• The prometheus plugin schema has not been changed (measurements have not been aggregated).

Packaging change note:

RHEL/CentOS users upgrading from 0.2.x to 0.10.0 will probably have their configurations overwritten by the upgrade. There is a backup stored at /etc/telegraf/telegraf.conf.$(date +%s).backup.

Features

• Plugin measurements aggregated into a single measurement.
• Added ability to specify per-plugin tags
• Added ability to specify per-plugin measurement suffix and prefix. (name_prefix and name_suffix)
• Added ability to override base plugin measurement name. (name_override)

Bugfixes

v0.2.5 [unreleased]

Features

• #427: zfs plugin: pool stats added. Thanks @allenpetersen!
• #428: Amazon Kinesis output. Thanks @jimmystewpot!
• #449: influxdb plugin, thanks @mark-rushakoff

Bugfixes

• #430: Network statistics removed in elasticsearch 2.1. Thanks @jipperinbham!
• #452: Elasticsearch open file handles error. Thanks @jipperinbham!

v0.2.4 [2015-12-08]

Features

• #412: Additional memcached stats. Thanks @mgresser!
• #410: Additional redis metrics. Thanks @vlaadbrain!
• #414: Jolokia plugin auth parameters
• #415: memcached plugin: support unix sockets
• #418: memcached plugin additional unit tests.
• #408: MailChimp plugin.
• #382: Add system wide network protocol stats to net plugin.
• #401: Support pass/drop/tagpass/tagdrop for outputs. Thanks @oldmantaiter!

Bugfixes

• #405: Prometheus output cardinality issue
• #388: Fix collection hangup when cpu times decrement.

v0.2.3 [2015-11-30]

Release Notes

• breaking change The kafka plugin has been renamed to kafka_consumer. and most of the config option names have changed. This only affects the kafka consumer plugin (not the output). There were a number of problems with the kafka plugin that led to it only collecting data once at startup, so the kafka plugin was basically non- functional.
• Plugins can now be specified as a list, and multiple plugin instances of the same type can be specified, like this:

[[inputs.cpu]]
  percpu = false
  totalcpu = true

[[inputs.cpu]]
  percpu = true
  totalcpu = false
  drop = ["cpu_time"]

• Riemann output added
• Aerospike plugin: tag changed from host -> aerospike_host

Features

• #379: Riemann output, thanks @allenj!
• #375: kafka_consumer service plugin.
• #392: Procstat plugin can now accept pgrep -f pattern, thanks @ecarreras!
• #383: Specify plugins as a list.
• #354: Add ability to specify multiple metrics in one statsd line. Thanks @MerlinDMC!

Bugfixes

• #371: Kafka consumer plugin not functioning.
• #389: NaN value panic

v0.2.2 [2015-11-18]

Release Notes

• 0.2.1 has a bug where all lists within plugins get duplicated, this includes lists of servers/URLs. 0.2.2 is being released solely to fix that bug

Bugfixes

• #377: Fix for duplicate slices in inputs.

v0.2.1 [2015-11-16]

Release Notes

• Telegraf will no longer use docker-compose for "long" unit test, it has been changed to just run docker commands in the Makefile. See make docker-run and make docker-kill. make test will still run all unit tests with docker.
• Long unit tests are now run in CircleCI, with docker & race detector
• Redis plugin tag has changed from host to server
• HAProxy plugin tag has changed from host to server
• UDP output now supported
• Telegraf will now compile on FreeBSD
• Users can now specify outputs as lists, specifying multiple outputs of the same type.

Features

• #325: NSQ output. Thanks @jrxFive!
• #318: Prometheus output. Thanks @oldmantaiter!
• #338: Restart Telegraf on package upgrade. Thanks @linsomniac!
• #337: Jolokia plugin, thanks @saiello!
• #350: Amon output.
• #365: Twemproxy plugin by @codeb2cc
• #317: ZFS plugin, thanks @cornerot!
• #364: Support InfluxDB UDP output.
• #370: Support specifying multiple outputs, as lists.
• #372: Remove gosigar and update go-dockerclient for FreeBSD support. Thanks @MerlinDMC!

Bugfixes

• #331: Dont overwrite host tag in redis plugin.
• #336: Mongodb plugin should take 2 measurements.
• #351: Fix continual "CREATE DATABASE" in writes
• #360: Apply prefix before ShouldPass check. Thanks @sotfo!

v0.2.0 [2015-10-27]

Release Notes

• The -test flag will now only output 2 collections for plugins that need it
• There is a new agent configuration option: flush_interval. This option tells Telegraf how often to flush data to InfluxDB and other output sinks. For example, users can set interval = "2s" and flush_interval = "60s" for Telegraf to collect data every 2 seconds, and flush every 60 seconds.
• precision and utc are no longer valid agent config values. precision has moved to the influxdb output config, where it will continue to default to "s"
• debug and test output will now print the raw line-protocol string
• Telegraf will now, by default, round the collection interval to the nearest even interval. This means that interval="10s" will collect every :00, :10, etc. To ease scale concerns, flushing will be "jittered" by a random amount so that all Telegraf instances do not flush at the same time. Both of these options can be controlled via the round_interval and flush_jitter config options.
• Telegraf will now retry metric flushes twice

Features

• #205: Include per-db redis keyspace info
• #226: Add timestamps to points in Kafka/AMQP outputs. Thanks @ekini
• #90: Add Docker labels to tags in docker plugin
• #223: Add port tag to nginx plugin. Thanks @neezgee!
• #227: Add command intervals to exec plugin. Thanks @jpalay!
• #241: MQTT Output. Thanks @shirou!
• Memory plugin: cached and buffered measurements re-added
• Logging: additional logging for each collection interval, track the number of metrics collected and from how many inputs.
• #240: procstat plugin, thanks @ranjib!
• #244: netstat plugin, thanks @shirou!
• #262: zookeeper plugin, thanks @jrxFive!
• #237: statsd service plugin, thanks @sparrc
• #273: puppet agent plugin, thats @jrxFive!
• #280: Use InfluxDB client v2.
• #281: Eliminate need to deep copy Batch Points.
• #286: bcache plugin, thanks @cornerot!
• #287: Batch AMQP output, thanks @ekini!
• #301: Collect on even intervals
• #298: Support retrying output writes
• #300: aerospike plugin. Thanks @oldmantaiter!
• #322: Librato output. Thanks @jipperinbham!

Bugfixes

• #228: New version of package will replace old one. Thanks @ekini!
• #232: Fix bashism run during deb package installation. Thanks @yankcrime!
• #261: RabbitMQ panics if wrong credentials given. Thanks @ekini!
• #245: Document Exec plugin example. Thanks @ekini!
• #264: logrotate config file fixes. Thanks @linsomniac!
• #290: Fix some plugins sending their values as strings.
• #289: Fix accumulator panic on nil tags.
• #302: Fix [tags] getting applied, thanks @gotyaoi!

v0.1.9 [2015-09-22]

Release Notes

• InfluxDB output config change: url is now urls, and is a list. Config files will still be backwards compatible if only url is specified.
• The -test flag will now output two metric collections
• Support for filtering telegraf outputs on the CLI -- Telegraf will now allow filtering of output sinks on the command-line using the -outputfilter flag, much like how the -filter flag works for inputs.
• Support for filtering on config-file creation -- Telegraf now supports filtering to -sample-config command. You can now run telegraf -sample-config -filter cpu -outputfilter influxdb to get a config file with only the cpu plugin defined, and the influxdb output defined.
• Breaking Change: The CPU collection plugin has been refactored to fix some bugs and outdated dependency issues. At the same time, I also decided to fix a naming consistency issue, so cpu_percentageIdle will become cpu_usage_idle. Also, all CPU time measurements now have it indicated in their name, so cpu_idle will become cpu_time_idle. Additionally, cpu_time measurements are going to be dropped in the default config.
• Breaking Change: The memory plugin has been refactored and some measurements have been renamed for consistency. Some measurements have also been removed from being outputted. They are still being collected by gopsutil, and could easily be re-added in a "verbose" mode if there is demand for it.

Features

• #143: InfluxDB clustering support
• #181: Makefile GOBIN support. Thanks @Vye!
• #203: AMQP output. Thanks @ekini!
• #182: OpenTSDB output. Thanks @rplessl!
• #187: Retry output sink connections on startup.
• #220: Add port tag to apache plugin. Thanks @neezgee!
• #217: Add filtering for output sinks and filtering when specifying a config file.

Bugfixes

• #170: Systemd support
• #175: Set write precision before gathering metrics
• #178: redis plugin, multiple server thread hang bug
• Fix net plugin on darwin
• #84: Fix docker plugin on CentOS. Thanks @neezgee!
• #189: Fix mem_used_perc. Thanks @mced!
• #192: Increase compatibility of postgresql plugin. Now supports versions 8.1+
• #203: EL5 rpm support. Thanks @ekini!
• #206: CPU steal/guest values wrong on linux.
• #212: Add hashbang to postinstall script. Thanks @ekini!
• #212: Fix makefile warning. Thanks @ekini!

v0.1.8 [2015-09-04]

Release Notes

• Telegraf will now write data in UTC at second precision by default
• Now using Go 1.5 to build telegraf

Features

• #150: Add Host Uptime metric to system plugin
• #158: Apache Plugin. Thanks @KPACHbIuLLIAnO4
• #159: Use second precision for InfluxDB writes
• #165: Add additional metrics to mysql plugin. Thanks @nickscript0
• #162: Write UTC by default, provide option
• #166: Upload binaries to S3
• #169: Ping plugin

Bugfixes

v0.1.7 [2015-08-28]

Features

• #38: Kafka output producer.
• #133: Add plugin.Gather error logging. Thanks @nickscript0!
• #136: Add a -usage flag for printing usage of a single plugin.
• #137: Memcached: fix when a value contains a space
• #138: MySQL server address tag.
• #142: Add Description and SampleConfig funcs to output interface
• Indent the toml config file for readability

Bugfixes

• #128: system_load measurement missing.
• #129: Latest pkg url fix.
• #131: Fix memory reporting on linux & darwin. Thanks @subhachandrachandra!
• #140: Memory plugin prec->perc typo fix. Thanks @brunoqc!

v0.1.6 [2015-08-20]

Features

• #112: Datadog output. Thanks @jipperinbham!
• #116: Use godep to vendor all dependencies
• #120: Httpjson plugin. Thanks @jpalay & @alvaromorales!

Bugfixes

• #113: Update README with Telegraf/InfluxDB compatibility
• #118: Fix for disk usage stats in Windows. Thanks @srfraser!
• #122: Fix for DiskUsage segv fault. Thanks @srfraser!
• #126: Nginx plugin not catching net.SplitHostPort error

v0.1.5 [2015-08-13]

Features

• #54: MongoDB plugin. Thanks @jipperinbham!
• #55: Elasticsearch plugin. Thanks @brocaar!
• #71: HAProxy plugin. Thanks @kureikain!
• #72: Adding TokuDB metrics to MySQL. Thanks vadimtk!
• #73: RabbitMQ plugin. Thanks @ianunruh!
• #77: Automatically create database.
• #79: Nginx plugin. Thanks @codeb2cc!
• #86: Lustre2 plugin. Thanks srfraser!
• #91: Unit testing
• #92: Exec plugin. Thanks @alvaromorales!
• #98: LeoFS plugin. Thanks @mocchira!
• #103: Filter by metric tags. Thanks @srfraser!
• #106: Options to filter plugins on startup. Thanks @zepouet!
• #107: Multiple outputs beyong influxdb. Thanks @jipperinbham!
• #108: Support setting per-CPU and total-CPU gathering.
• #111: Report CPU Usage in cpu plugin. Thanks @jpalay!

Bugfixes

• #85: Fix GetLocalHost testutil function for mac users
• #89: go fmt fixes
• #94: Fix for issue #93, explicitly call sarama.v1 -> sarama
• #101: switch back from master branch if building locally
• #99: update integer output to new InfluxDB line protocol format

v0.1.4 [2015-07-09]

Features

• #56: Update README for Kafka plugin. Thanks @EmilS!

Bugfixes

• #50: Fix init.sh script to use telegraf directory. Thanks @jseriff!
• #52: Update CHANGELOG to reference updated directory. Thanks @benfb!

v0.1.3 [2015-07-05]

Features

• #35: Add Kafka plugin. Thanks @EmilS!
• #47: Add RethinkDB plugin. Thanks @jipperinbham!

Bugfixes

• #45: Skip disk tags that don't have a value. Thanks @jhofeditz!
• #43: Fix bug in MySQL plugin. Thanks @marcosnils!

v0.1.2 [2015-07-01]

Features

• #12: Add Linux/ARM to the list of built binaries. Thanks @voxxit!
• #14: Clarify the S3 buckets that Telegraf is pushed to.
• #16: Convert Redis to use URI, support Redis AUTH. Thanks @jipperinbham!
• #21: Add memcached plugin. Thanks @Yukki!

Bugfixes

• #13: Fix the packaging script.
• #19: Add host name to metric tags. Thanks @sherifzain!
• #20: Fix race condition with accumulator mutex. Thanks @nkatsaros!
• #23: Change name of folder for packages. Thanks @colinrymer!
• #32: Fix spelling of memoory -> memory. Thanks @tylernisonoff!

v0.1.1 [2015-06-19]

Release Notes

This is the initial release of Telegraf.