* ceph: maps are already refs, no need to use a pointer
* ceph: pgmap_states are represented in a single metric "count", differenciated by tag
* Update CHANGELOG
* Add in support for looking for substring in response
* Add note to CHANGELOG.md
* Switch from substring match to regex match
* Requested code changes
* Make requested changes and refactor to avoid nested if-else.
* Convert tabs to space and compile regex once
* Make Logparser Plugin Check For New Files
Check in the Gather metric to see if any new files matching the glob
have appeared. If so, start tailing them from the beginning.
* changelog update for #2141
If we write a batch of points and get a "field type conflict" error
message in return, we should drop the entire batch of points because
this indicates that one or more points have a type that doesnt match the
database.
These errors will never go away on their own, and InfluxDB will
successfully write the points that dont have a conflict.
closes#2245
doing this unblocks incoming metrics while waiting for a flush to take
place.
we have to create a semaphore so that we can
'skip' flushes that try to run while a flush is already running.
closes#2262
this basically reverts #887
at some point we might want to do some special handling of reloading
plugins and keeping their state intact, but that will need to be done at
a higher level, and in a way that is thread-safe for multiple input
plugins of the same type.
Unfortunately this is a rather large feature that will not have a quick
fix available for it.
fixes#1975fixes#2102
* MongoDB input plugin: Improve state data
Adds ARB as a "member_status" (replica set arbiter).
Uses MongoDB replica set state string for "state" value.
* MongoDB input plugin: Improve state data - changelog update
put Makefile back to normal
removed comment from puppetagent.go
changed config_version to config_version_string and fixed yaml for build
changed workind from branch to environment for config_string
fixed casing and Changelog
fixed test case
closes#1917
* Fix bug: too many cloudwatch metrics
Cloudwatch metrics were being added incorrectly. The most obvious
symptom of this was that too many metrics were being added. A simple
check against the name of the metric proved to be a sufficient fix. In
order to test the fix, a metric selection function was factored out.
* Go fmt cloudwatch
* Cloudwatch isSelected checks metric name
* Move cloudwatch line in changelog to 1.2 features
* return partition stat alongside disk stat from disk usage method, and report device name (minus /dev/) as a tag in disk stats
* update system/disk tests to include new partition stat return value from disk usage method calls
* update changelog for #1807 (use device name instead of path to report disk stats)
The old gonuts fork has no License and has not seen any commits
differing from the original project, while the original has seen some
activity, even if low.
Having no license is a problem for distributors, as by default, such
projects are undistributable.
* Trim null characters in Value data format
Some producers (such as the paho embedded c mqtt client) add a null
character "\x00" to the end of a message. The Value parser would fail on
any message from such a producer.
* Trim whitespace and null in all Value data formats
* No unnecessary reassignments in Value data format parser
* Update change log for Value data format fix
* NATS output plug-in now retries to reconnect forever after a lost connection.
* NATS input plug-in now retries to reconnect forever after a lost connection.
* Fixes#1953
The MySQL DB driver has it's own DSN parsing function. Previously we
were using the url.Parse function, but this causes problems because a
valid MySQL DSN can be an invalid http URL, namely when using some
special characters in the password.
This change uses the MySQL DB driver's builtin ParseDSN function and
applies a timeout parameter natively via that.
Another benefit of this change is that we fail earlier if given an
invalid MySQL DSN.
closes#870closes#1842
Previously, the graphite parser would simply overwrite any template that
had an identical filter to a previous template. This included the empty
filter.
Now we will still overwrite, but first we will sort to make sure that
the most "specific" template always matches.
closes#1731
* Allow numeric and non-string values for tag_keys.
According to the go documentation the JSON deserializer only produces these
base types in output:
- string
- bool
- float64
- nil
With this patch bool, float64 and nil values get converted to a string when
their field key is specified in tag_keys. Previously the field was simply
discarded.
* Updated handling of nil for passing tests.
The automated tests are less than trivial to reproduece locally for me,
so I hope CircleCI wonn't mind...
* Updated changelog entries with PR and issue links.
* separate hello and authenticate functions, force connection close at end of write cycle so we don't hold open idle connections, which has the benefit of mostly removing the chance of getting hopelessly connection lost
* update changelog, though this will need to be updated again to merge into telegraf master
* bump instrumental agent version
* fix test to deal with better better connect/reconnect logic and changed ident & auth handshake
* Update CHANGELOG.md
correct URL from instrumental fork to origin and put the change in the correct part of the file
* go fmt
* Split out Instrumental tests for invalid metric and value.
* Ensure nothing remains on the wire after final test.
* Force valid metric names by replacing invalid parts with underscores.
* Multiple invalid characters being joined into a single udnerscore.
* Adjust comment to what happens.
* undo split hello and auth commands, to reduce roundtrips
* Add ignored_databases option to postgresql configuration files, to enable easy filtering of system databases without needing to whitelist all the databases on the server. Add tests for database whitelist and blacklist.
* run go fmt on new postgresql database whitelist/blacklist code
* add postgresql database blacklist option to changelog
* remove a bad merge from the changelog
also remove locking around adding metrics. Instead, keep a waitgroup on
the ServeHTTP function and wait for that to finish before returning from
the Stop() function
closes#1407
fix incredibly stupid bugs
populate README
support query endpoint and change default listen port
set response headers for query endpoint
add unit tests
revert erroneous Godeps change
add plugin ref to top-level README
remove debug output and add empty post body test
fix linter errors
move stoppableListener into repo
use constants for http status codes
add CHANGELOG entry
address code review comments re. style/structure
address further code review comments
add note to README re. database creation calls per PR comments
closes#1542
Generalize event.
Add doc.
Update default config.
Add filestack to the list of plugins.
Check that video conversion event returns 400.
Update the readme.
Update the changelog.
The iptables plugin aims at monitoring bytes and packet counters
matching a given set of iptables rules.
Typically the user would set a dedicated monitoring chain into a given
iptables table, and add the rules to monitor to this chain. The plugin
will allow to focus on the counters for this particular table/chain.
closes#1471
Added the option removecr to inputs.exec to remove all carraige returns
(CR, ASCII 0x0D, Unicode codepoint \u0D, ^M). The option is boolean and
not enabled if not present in the config file.
closes#1606
Updated CHANGELOG.md with information about removecr
Ran go fmt ./...
Moved removal of CRs to internal/internal.go
Moved the code to remove carriage returns from
plugins/inputs/exec/exec.go to internal/internal.go. Additionally
changed the conditional on which it gets applied from using a
configuration file option to checking if it is running on Windows.
Moved Carriage Return check to correct place
Moved the carriage return removal back to the exec plugin. Added unit
testing for it. Fixed a bug (removing too many characters).
Ran go fmt ./...
Reverted CHANGELOG to master
Updated Changelog
closes#1539
First version of http put working
Refactored code to separate http handling from opentsdb module. Added batching support.
Fixed tag cleaning in http output and refactored telnet output.
Removed useless struct.
Fixed current unittest and added a new one.
Added benchmark test to test json serialization. Made sure http client would reuse connection.
Ran go fmt on opentsdb sources.
Updated README file
Removed useHttp in favor of parsing host string to determine the right API to use for sending metrics. Also renamed BatchSize to HttpBatchSize to better convey that it is only used when using Http API.
Updated changelog
Fixed format issues.
Removed TagSet type to make it more explicit.
Fixed unittest after removing TagSet type.
Revert "Updated changelog"
This reverts commit 24dba5520008d876b5a8d266c34a53e8805cc5f5.
Added PR under 1.1 release.
add missing redis metrics
This makes sure that all redis metrics are present without having to use a hard-coded list of what metrics to pull in.
The existing ceph input plugin only has access to the local admin daemon socket
on the local host, and as such has access to a limited subset of data. This
extends the plugin to use CLI commands to get access to the full spread of Ceph
data. This patch collects global OSD map and IO statistics, PG state and per pool
IO and utilization statistics.
closes#1513
* separate hello and authenticate functions, force connection close at end of write cycle so we don't hold open idle connections, which has the benefit of mostly removing the chance of getting hopelessly connection lost
* update changelog, though this will need to be updated again to merge into telegraf master
* bump instrumental agent version
* fix test to deal with better better connect/reconnect logic and changed ident & auth handshake
* Update CHANGELOG.md
correct URL from instrumental fork to origin and put the change in the correct part of the file
* go fmt
* Split out Instrumental tests for invalid metric and value.
* Ensure nothing remains on the wire after final test.
* Force valid metric names by replacing invalid parts with underscores.
* Multiple invalid characters being joined into a single udnerscore.
* Adjust comment to what happens.
* undo split hello and auth commands, to reduce roundtrips
* Split out Instrumental tests for invalid metric and value.
* Ensure nothing remains on the wire after final test.
* Force valid metric names by replacing invalid parts with underscores.
* Multiple invalid characters being joined into a single udnerscore.
* add an entry to CHANGELOG for easy merging upstream
* go fmt variable alignment
* remove some bugfixes from changelog which now more properly are in a different section.
* remove headers and whitespace should should have been removed with the last commit
this will now be the default config file location on windows, basically
it is the windows equivalent of /etc/telegraf/telegraf.conf
also updating the changelog
closes#1543
Updated windows dependencies
Updated the windows dependencies so that the versions matched the
dependencies for Mac OS and Linux. Additionally added some that were
complained about being missing at compile time.
Incorporated kardianos/service for management
Incorporated the library github.com/kardianos/service to manage the
service on the various platforms (including Windows). This required an
alternate main function.
The original main function was renamed to reloadLoop (as that is what
the main loop in it does) (it also got a couple of parameters). The
service management library calls it as the main body of the program.
Merged service.go into telegraf.go
Due to compilation issues on Windows, moved the code from service.go
into telegraf.go and removed service.go entirely.
Updated dependencies and fixed Windows service
Updated the dependencies so that it builds properly on Windows,
additionally, fixed the registered command for starting it as
a service (needed to add the config file option). This currently
standardizes it as a C:\telegraf\telegraf.conf on Windows.
Added dependency for github.com/kardianos/service
Removed the common dependencies from _windows file
Removed all the common dependencies from the Godeps_windows file and
modified Makefile to load Godeps and then Godeps_windows when building
for Windows. This should reduce problems caused by the Godeps_windows
file being forgotten when updating dependencies.
Updated CHANGELOG.md with changes
Ran `go fmt ./...` to format code
Removed service library on all but Windows
The service library [kardianos/service](github.com/kardianos/service)
has been disabled on all platforms but windows, as there is already
existing infrastructure for other platforms.
Removed the dependency line for itself
It appears that gdm accidentally added the project itself to the
dependency list. This caused the dependency restoration to select an
earlier version of the project during build.
This only affected windows.
This only affected builds after 020b2c70
Updated documentation for Windows Service
Removed the documentation about using NSSM and added documentation on
installing telegraf directly as a Windows Service.
Added license info for kardianos/service
Added the license information for github.com/kardianos/service which is
licensed under the ZLib license, although that name is never mentioned
the license text matches word for word.
Changed the Windows Config file default location
Updated the default location of the configuration file on Windows from
C:\telegraf\telegraf.conf to C:\Program Files\Telegraf\telegraf.conf.
With this change includes updating the directions, including directing
that the executable be put into that same directory. Additionally, as
noted in the instructions, the location of the config file for the
service may be changed by specifying the location with the `-config`
flag at install time.
Fixed bug - Wrong data type: svcConfig
svcConfig service.Config => svcConfig *service.Config
(It needed to be a pointer)
1. in prometheus client, do not check for invalid characters anymore,
because we are already replacing all invalid characters with regex
anyways.
2. in win_perf_counters, sanitize field name _and_ measurement name.
Also add '%' to the list of sanitized characters, because this character
is invalid for most output plugins, and can also easily cause string
formatting issues throughout the stack.
3. All '%' will now be translated to 'Percent'
closes#1430
closes#1499closes#1019
Do no try to guess HAproxy stats url, just add ";csv" at the end of the
url if not present.
Signed-off-by: tgermain <timothee.germain@corp.ovh.com>
* add initial support to allow self-signed certs
When using self-signed the metrics collection will fail, this will allow
the user to specify in the input configuration file if they want to skip
certificate verification. This is functionally identical to `curl -k`
At some point this functionality should be moved to the agent as it is
already implemented identically in several different input plugins.
* Add initial comment strings to remove noise
These should be properly fleshed out at some point to ensure
code completeness
* refactor to use generic helper function
* fix import statement against fork
* update changelog
closes#1436
This also fixes the bad behavior of waiting until runtime to return log
parsing pattern compile errors when a pattern was simply unfound.
closes#1418
Also protect against user error when the telegraf user does not have
permission to open the provided file. We will now error and exit in this
case, rather than silently waiting to get permission to open it.
* Add mandrill webhook.
* Store the id of the msg as part of event.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Decode body to get the mandrill_events.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Handle HEAD request.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Add the README.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Add mandrill_webhooks to the README.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Update changelog.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Run gofmt.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
closes#1412
separate hello and authenticate functions,
force connection close at end of write cycle so we don't
hold open idle connections,
which has the benefit of mostly removing
the chance of getting hopelessly connection lost
bump instrumental agent version
fix test to deal with better better connect/reconnect logic and changed ident & auth handshake
Update CHANGELOG.md
correct URL from instrumental fork to origin and put the change in the correct part of the file
go fmt
undo split hello and auth commands, to reduce roundtrips
This is for better thread-safety when running with multiple outputs,
which can cause very odd panics at very high loads
primarily this is to address #1432closes#1432
closes#1289
Signed-off-by: François de Metz <francois@stormz.me>
Signed-off-by: Cyril Duez <cyril@stormz.me>
Rename internals struct.
Signed-off-by: François de Metz <francois@stormz.me>
Signed-off-by: Cyril Duez <cyril@stormz.me>
Update changelog.
Signed-off-by: François de Metz <francois@stormz.me>
Signed-off-by: Cyril Duez <cyril@stormz.me>
Update READMEs and CHANGELOG.
Signed-off-by: François de Metz <francois@stormz.me>
Signed-off-by: Cyril Duez <cyril@stormz.me>
Update SampleConfig.
Update the config format.
Update telegraf config.
Update the webhooks README.
Update changelog.
Update the changelog with an upgrade path.
Update default ports.
Fix indent.
Check for nil value on AvailableWebhooks.
Check for CanInterface.
* Allow for TLS connections to ElasticSearch
Extremely similar implementation to the HTTP JSON module's
implementation of the same code.
* Changelog update
Adding precision rounding to the accumulator. This means that now every
input metric will get rounded at collection, rather than at write (and
only for the influxdb output).
This feature is disabled for service inputs, because service inputs
should be in control of their own timestamps & precisions.
use a common function between collection_jitter and flush_jitter. which
creates the same behavior between the two options.
going forward, both jitters will be random sleeps that get re-evaluated
at runtime for every interval (previously only collection_jitter did
this)
also fixes behavior so that both jitters will exit in the event of a
process exit.
closes#1296
- Updated README/CHANGELOG
- Added links to further info to input README
- Reduced lines to 80 chars
Removing input declaration from SampleConfig
Moved PR to unreleased section of changelog
closes#1165
- Collects conntrack stats from the configured directories and files.
Applying PR feedback:
- Rebased onto master
- Updated README/CHANGELOG
- Limited lines to 80 chars
- Improved plugin docs and README
- added a dummy notlinux build file
Fixed up CHANGELOG and README after rebase
closes#1164
Allow using glob pattern in the command list in configuration. This enables for
example placing all commands in a single directory and using /path/to/dir/*.sh
as one of the commands to run all shell scripts in that directory.
Glob patterns are applied on every run of the commands, so matching commands can
be added without restarting telegraf.
closes#1142
* Use shared AWS credential configuration.
* Cloudwatch dimension wilcards
* Allow configuring cache_ttl for cloudwatch metrics.
* Allow for wildcard in dimension values to select all available metrics.
* Use internal.Duration for CacheTTL and go fmt
* Refactor to not use embedded structs for config.
* Update AWS plugin READMEs with credentials details, update Changelog.
* Fix changelog after rebasing to master and 0.13.1 release.
* Fix changelog after rebase.
* Report rollbar events.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Fix indent with go fmt.
* Add test for rollbar webhooks.
* Report more data from new_item event.
* Handle new deploy webhook.
Signed-off-by: Cyril Duez <cyril@stormz.me>
Signed-off-by: François de Metz <francois@stormz.me>
* Update default port.
* Add readme.
* Add rollbar_webhooks to the readme.
* Add rollbar_webhooks to plugins list.
* Add tag level for new_item event.
* Update readme.
* Update changelog.
* Adding Varnish HTTP Cache input plugin
* Applying PR feedback
- Linked to varnish in input README
- Updated README/CHANGELOG
- Cleaned up sampleConfig to remove formatting
- Shorted lines to 80 chars (except where test input requires long strings)
- Using internal.RunTimeout to wrap call to varnishtat
- Added dummy file for windows
Also changing the net_response and http_response plugins to only accept
duration strings for their timeout parameters. This is a breaking config
file change.
closes#1214
Changing the internal behavior around running plugins. Each plugin
will now have it's own goroutine with it's own ticker. This means that a
hung plugin will not block any other plugins. When a plugin is hung, we
will log an error message every interval, letting users know which
plugin is hung.
Currently the input interface does not have any methods for killing a
running Gather call, so there is nothing we can do but log an "ERROR"
and move on. This will give some visibility into the plugin that is
acting up.
closes#1230fixes#479
Allow using glob pattern in the command list in configuration. This enables for
example placing all commands in a single directory and using /path/to/dir/*.sh
as one of the commands to run all shell scripts in that directory.
Glob patterns are applied on every run of the commands, so matching commands can
be added without restarting telegraf.
closes#1127
Lustre Jobstats allows for RPCs to be tagged with a value, such
as a job's ID. This allows for per job statistics. This plugin
collects statistics and tags the data with the jobid.
closes#1107
- renaming cont_name and cont_image to container_name and
container_image.
- cont_id is now a field, called container_id
- docker_cpu, docker_mem, docker_net measurements have been renamed to
docker_container_cpu, docker_container_mem, and docker_container_net
closes#1014closes#1052
- Check and return error from NewBatchPoints to prevent runtime panic if
user provides an unparsable precision time unit in config.
- Provide correct sample config precision examples.
- Update etc/telegraf.conf precision comment.
closes#715
* Customizable 'separator' option instead of hard-coded '_'
* String values are sent as "State" instead of "Metric", preventing
Riemann from rejecting them
* Riemann service name is set to an (ugly) combination of input name &
(sorted) tags' values...this allows connecting different events for
the same input together on the Riemann side
closes#642
Patrick Hemmer
Matteo Cerutti
Cameron Sparr
Jérôme Vizcaino
Len Smith
Pierre Fersing
njwhite
Martin
John Engelman
Patrick Hemmer
James
Dominik Labuda
Jeff Ashton
Pierre Tessier
Tevin Jeffrey
Doug Reese
Frank Stutz
Jose Luis Navarro
Pieter Slabbert
Jonas Falck
Leon Barrett
Rikaard Hosein
Patrick Hemmer
Christian Eichelmann
Nathan D Acuff
Foxlik
Guillem Jover
karech
Mike Ragalie
Paulo Pires
Jonathan Chauncey
Ririsoft
Eric
Marko Crnic
Edie Zhang
Daniele Gozzi
Ross McDonald
David Norton
Rene Zbinden
Sean Beckett
ncohensm
aaron jheng
David Caldwell
François de Metz
Butitsnotme
Yaser Alraddadi
Simon Murray
Joel "The Merciless" Meador
Cameron Sparr
politician
jsvisa
Rene Zbinden
Dennis Bellinger
Srini Chebrolu
Victor Garcia
Mendelson Gusmão
Torsten Rehn
Timothée GERMAIN
Matt Jones
Tim Allen
Mark McKinstry
ashish
Shashank Sahni
Andrei Burd
Vladimir S
Thibault Cohen
Mike Glazer
Konstantin Kulikov
Iiro Uusitalo
Tobias Schoknecht
Ali Alrahaleh
Łukasz Harasimowicz
Martin Seener
robinpercy-xm
Jari Sukanen
Cyril Duez
robinpercy-xm
Kane Dou
Jason Roelofs
Zdenek Styblik
Pierre Fersing
Victor Garcia
G-regL
Bob Zoller
Simone Aiello
Jesse Hanley
zensqlmonitor
Larry Kim
Eugene Chupriyanov
Maksadbek
chaton78
Subhachandra Chandra
Josh Hardy
Sergio Jimenez
Martti Rannanjärvi
Armin Wolfermann
Florent Ramière
Rudenkovk Konstantin
Adam Argo
Chris H (CruftMaster)
Thomas Menard
Balakrishnan
Lukasz Jagiello
Marcelo Salazar
Eugene Dementiev
Thibault Cohen
LordFPL
Prune Sebastien THOMAS
Ross McDonald
Manuel Sangoi
bastard
Matt Heath
Aurélien DEHAY
Marcin Jasion
Jason Coene
Dragostin Yanev (netixen)
Gabriel Levine
Andrei Burd
Thomas Menard
Miki
Dhruv Bansal